NOTE: The command will be executed immediately upon clicking the Execute button.
| General Commands | ||
|---|---|---|
| REBOOT | Reboots the system. | |
| RELAY # ON/OFF | Sets the state of relays 1-6. | |
| RELAY var | Activates the mapped relay named 'var' | |
| SET ZONE # | Sets the zone (-4 to 20, 0=Pacific, 1=Mountain, 2=Central...). | |
| SET ZONEMINUTES # | Adds minute offset (0-59) to timezone, eg for 30min offsets. | |
| SET DST # | Sets daylight saving time participation (0 or 1). | |
| CMDMENU 0/OFF | Disables this page. | |
| SERDEBUG 0/OFF/1/ON | Turn serial debug on/off | |
| HISTINROM 0/OFF/1/ON | Save Log1/15 in rom. | |
| SYNCPGMS | Perform syncpgms | |
| SYNCPGMS Tx | Set syncpgms threshold to x (power of 2) | |
| SYNCPGMS ON/OFF | Enable/Disable syncpgms | |
| SVI ON/MIN/OFF | Enable Full/Min/Disable SatelliteViaInet | |
| SATTOSVI 1/ON/0/OFF | Enable/Disable Svi2Sat Failover | |
| Drive Commands | ||
| FORMAT | Wipes the disk and restarts the system. | |
| DEL | Deletes one (or more with mask) files from the drive. | |
| RENAME |
Renames a file on the hard drive. | |
| Network Commands | ||
| DHCP YES/NO | Turns on or off the DHCP client | |
| NEWIP #.#.#.# | Changes the IP to a static address #.#.#.# | |
| NEWNETMASK #.#.#.# | Changes the net mask to #.#.#.# | |
| NEWGATEWAY #.#.#.# | Changes the gateway to #.#.#.# | |
| WEBPORT # | Changes the HTTP port for browser access | |
| NEWSERVERx #.#.#.# | Changes the address of server x to #.#.#.# | |
| NEWPORTx # | Changes the port of server x to # | |
| NEWLOADSERVERx #.#.#.# | Changes the address of loading server x to #.#.#.# | |
| NEWLOADPORTx # | Changes the port of loading server x to # | |
| NEWSTREAMSERVERx #.#.#.# | Changes the address of stream server x to #.#.#.# | |
| MOVETOSERVER #.#.#.# | Moves streams to server #.#.#.# | |
| CALLBACKSECONDS # | Change inet callback to # seconds (30-86400) | |
| SET CTIMEOUT # | Changes connection timeout to # seconds (10-30) | |
| SET MAXMSS # | Sets tcp max segment length (range 1200-1460) | |
| DNS (host or ip) | Does dns lookup on host or reverse lookup on ip | |
| TRACERT ip | Does trace route on ip | |
| Satellite Control Commands | ||
| NEWPID 0x#### | Allows changing the data PID. | |
| NEWFREQ # | Allows reprogramming of the LBand frequency (in hz). | |
| NEWSYMBOLRATE # | Allows reprogramming of the symbol rate (in hz). | |
| CONTROLADDRESS #.#.#.# | Sets the Multicast address to process. | |
| CONTROLPORT # | Sets the Multicast port to process. | |
| Audio Control Commands | ||
| AUDPLAY Source on Target(s) | Auditions the source (file, PID, stream) on a target list. Example: AUDPLAY FILE.MP2 ON T1 | |
| AUDSTOP | Stops playback of the audition. | |
| AUDFADE | Fades out and stops playback of the audition. | |
| ALLSTOP | Immediately stops all audio playback. | |
| TSTOP Target | Stops audio playback on a single target. Example: TSTOP T1 | |
| TMAP# Target | Sets TMAP1 through TMAP7 to the target. Example: TMAP3 T1L | |
| TMAP7ARM ON/OFF | Sets the arming of TMAP7 for one-shot targeting. | |
| TONE ON/OFF | Turns the internal tone generator on or off. | |